USB Solutions

Faraday provides the complete USB solutions, including the controllers and PHY/ transceivers of USB 3.0/ USB 3.1 and USB 2.0 in wide range of process technology. In addition, PHYs and controllers for USB 2.0 OTG, USB 2.0 Host, USB 2.0 Device, and USB 2.0 Hub are also available.

USB 3.0 solutions
  • Fully compliant with USB 3.0/ USB 3.1 Gen 1 & Gen 2 specifications
  • Compliant PIPE interface for USB 3.0 and UTMI+ level 3 for USB 2.0
  • U0, U1, U2, and U3 power modes supported
  • 30MHz/25NHz/12MHz/10MHz crystal option
  • Spread spectrum clocking PLL integrated
  • Adaptive receive equalization for channel noise or crosstalk
  • Programmable transmit amplitude and pre-emphasis for low power
  • Self-calibrated termination resistance
  • Loopback & BIST mode embedded for fast testing
  • Complete integrated PHY and controller solution available

 

Solution
Process
Availability
USB 3.1 Gen 1 PHY for host and device 0.13µm Ready
0.11µm Ready
90nm Ready
55nm Ready
40nm Ready
28nm HPC Under development ⊙
USB 3.1 Gen 2 PHY for host and device
28nm HPC Under development ⊙
USB 3.1 G1 Type-C PHY for host and device 40nm Ready
USB 3.1 Gen 1 device controller USB-IF certified and available now
USB 3.1 Gen 1 host controller Under development ⊙
USB 3.1 Gen 1 dual role controller Under development ⊙

⊙ Please contact Faraday for the detail.

USB 2.0 solutions

Type
Transceiver (PHY)
Controller
USB 2.0 On-The-Go
FZOTG230
FZOTG266
FOTG210
USB 2.0 Host
FZOTG230
FZOTG266
FOTG210 (host mode)
USB 2.0 Device
FZOTG230/266
FZUSB236
FZUSB238

FUSB220
FOTG210 (device mode)